Engine, Securing To Engine And Transmission Holder: Procedure

WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .
Electric Drive Motor -V141-, separating from engine. Refer to Electric Drive Motor -V141-, SEPARATING FROM ENGINE .
:T10515/1 and :T10515/2 , removing from the engine.

-- Remove the resonator for the intake air scoop. Refer to INTAKE AIR SCOOP RESONATOR, REMOVING AND INSTALLING .

-- Engage the :2024A on engine and on :VAS6100 as shown.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The rail with holes must be inserted as shown to align it to the center of gravity of the assembly.

NOTE:

Risk of accident due to loose engine support bridge components.

Lifting hooks and pins on the engine sling must be secured with securing pins -arrows-.

-- Lower the engine from the T10497 using the :VAS6100 .

-- Secure the engine to the :VAS6095 as illustrated.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.