Adaptive Cruise Control, Calibrating
WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Conditions
- The Distance Regulation Control Module -J428- must be calibrated during the following conditions:
- Distance Regulation Control Module -J428- was removed and installed or replaced.
- Bumping into the Distance Regulation Control Module -J428- when carelessly assembling the front bumper cover.
- Damage to the front bumper cover through an accident or similar.
- The front bumper carrier was remove and installed or replaced.
- Rear axle toe will be adjusted.
NOTE:
To great of a horizontal adjustment of the Distance Regulation Control Module -J428- causes the function of the ACC/Front Assist to stay switched off. This is indicated by the following message in the Instrument Cluster -KX2- : ACC/Front Assist not available .
A limited sensor view due to a dirty sensor or inclement weather conditions (for example, heavy rain, snowfall, iced over sensor etc.) causes the ACC/Front Assist functions to be temporarily unavailable. This is indicated by the following message in the Instrument Cluster -KX2- : ACC/Front Assist: No sensor view .
-- Calibrate the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL (ACC) .