Rain/Light Recognition Sensor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment.

-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.

-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .

NOTE:

After loosening the retainer, wait at least one minute. This allows the silicone layer to release tension and is not damaged while removing.

-- Release the left and right retainer -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Starting at the top, carefully pry the Rain/Light Recognition Sensor -G397- -1- out of the frame on the windshield.

-- Release and disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Rain/Light Recognition Sensor -G397- -2-.

CAUTION:

Until it is reinstalled, store the removed Rain/Light Recognition Sensor -G397- so that the connecting pad is not contaminated with dust or other deposits.