Mounting Bracket, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
Cable, Securing
NOTE:
Pay attention to correct seating of the connector -5- for the keyless access authorization system.
For notes and procedures regarding a door handle with the keyless access authorization system. Refer to ACCESS/START AUTHORIZATION .
-- Pivot the retainer -3- slightly in direction of -arrow a-.
-- Push the cable pin -2- into the mount in direction of -arrow b-.
-- Guide the mounting bracket -1- into the door in direction of -arrow c-.
-- Tighten the bolt -4-.