Lock Cylinder, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the lock cylinder housing -1- into the mounting bracket -3- at a right angle in direction of -arrow a-.
-- Install the bolts -4- in the mounting bracket. The locking mechanism -6- pulls at the same time automatically in the position in direction of -arrow b-.
The door handle -2- swings automatically on to door.
NOTE:
The lock cylinder housing must be pressed onto the outer door panel while installing.
Perform the rest of the installation in the reverse order of removal.
- Then a function test must be performed with the door opened.