Rearview Camera -R189-, REMOVING AND INSTALLING

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

The Rearview Camera -R189- is integrated inside the rear lid handle button. The Rearview Camera -R189- and the handle button cannot be separated. In the damage claim the entire handle button with rearview camera must be replaced.

-- Removing and installing the rear lid handle button. Refer to ACTUATOR, REMOVING AND INSTALLING (MECHANISM) .

If the vehicle is configured with PR + KA1 the rearview camera system does not have to be calibrated after removing and installing the Rearview Camera -R189-, because the calibration of the rearview camera system automatically takes place.
If the vehicle is configured with PR + KA2 the rearview camera system must be calibrated after removing and installing the Rearview Camera -R189-. Refer to REARVIEW CAMERA SYSTEM, CALIBRATING .