Condenser/A/C Compressor Refrigerant Line, Removing And Installing: Removing
If necessary, remove the components of the air filter. Refer to OVERVIEW - AIR FILTER HOUSING .
If necessary, remove the sections of the air duct. Refer to OVERVIEW - INTAKE MANIFOLD .
If necessary, remove parts of the charge air system air duct. Refer to CHARGE AIR SYSTEM .
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
Danger or frostbite due to refrigerant coming out under pressure.
Frostbite on the skin and other parts of the body is possible.
- Wear safety gloves.
- Wear protective eyewear.
- Extract refrigerant and open the refrigerant circuit immediately.
- If more than 10 minutes elapse after extracting the refrigerant and the refrigerant circuit was not opened, extract the refrigerant again. Pressure can develop in the refrigerant circuit due to evaporation
-- Remove the bolt -5- of the upper refrigerant line -3-.
-- Remove the refrigerant line -3- from the condenser -1-.
-- Remove the bolt -3- for the refrigerant line -2-.
-- Remove the refrigerant line.