Transmission Tightening Specifications: Notes
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
| Item |
Bolt |
Nm |
| 1 and 2 |
M 12x45 |
80
- Using the Insert Tool - 18mm T10179 or T10509: >>65 Nm<<
|
| 3 |
M12x65 with nut |
80 |
| 4 |
M 12x45 |
80 |
| 5, 6, 7, 8 |
M10 x 45 |
40 |
| 9 1) |
M12 x 70 |
80 |
| A 2) |
Alignment sleeves for centering |
- 1)
does not apply to 2.0L engine.
- 2)
alignment sleeves for the 2.0L engine are located at items 3 and 8.
|
| Component |
Nm |
| Subframe mount to transmission (replace the bolts after removal) |
60 + 90° additional turn |
| Ground cable to subframe mount |
25 |
| Drive plate to torque converter |
57 |
| Right drive axle heat shield to bevel box |
20 |
| Driveshaft to bevel box |
Refer to OVERVIEW - DRIVESHAFT
. |
Bevel box to transmission
- Replace the bolts after removing them.
|
40 Nm + 90° additional turn |