ATF Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, 2018 Volkswagen Tiguan Limited, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following:

-- Always replace the O-rings -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- When installing the right and left bracket of the ATF cooler -1- push all the way in the tabs -arrow- on the radiator -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install and tighten the bolts -4-.

-- Install the ATF line -1- on the radiator -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the radiator shutter. Refer to OVERVIEW - FAN SHROUD AND RADIATOR FAN .

-- Install the front bumper. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Bleed the ATF circuit. Refer to ATF CIRCUIT, BLEEDING .