Control Module, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal.
- If a new control module is installed, a basic setting must be performed.
-- Connect the Vehicle Diagnostic Tester with the vehicle and start the Diagnostic mode.
- Select vehicle test
- All wheel drive (AWD) 5
- 01 OBD-capable system
- 22 All Wheel Drive Control Module J492
- 22 AWD electronics, functions
- 22 Control module, replacing
-- Follow the instructions on the display.