LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Interior Trim) >> 70 Interior Trim >> Instrument Panel CROSSMEMBER >> Instrument Panel CROSSMEMBER, Removing And Installing >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Instrument Panel CROSSMEMBER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Before installing the instrument panel crossmember, line it up with the markings made before it was removed.

Check all the fasteners for damage and replace if necessary.

Install in reverse order of removal and Note The Following  :

CAUTION:

If the crossmember is to be replaced with a new part, malfunctions due to faulty ground connections cannot be ruled out.

  • The ground connections must be free of paint, coating, and corrosion so that an error-free ground connection is guaranteed.
  • Mounting threads and contact surfaces between the crossmember and securing brackets must also be free of paint, coating, and corrosion. The threaded connections serve as the ground connection for the knee airbag.
  • The contact surfaces for the left and right tunnel support must be free of paint on both sides. They serve as the main ground path.
scientia non olet · About LEMON Manuals