Overview - EVAP System, Without Fuel Tank Leak Detection
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
- Bleeder Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Clipped to the fuel tank
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- Connection Diagram. Refer to Fig 2.
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to check for secure fit.
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- EVAP Canister
- Component location: at the right rear in the wheel housing under the wheel housing liner
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- Bleeder Line
- To the fuel tank
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to check for secure fit.
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Ventilation, Checking. Refer to FUEL TANK BLEEDING, CHECKING, VEHICLES WITHOUT FUEL TANK LEAK DETECTION .
- Connection Diagram. Refer to Fig 2.
Connection Diagram on EVAP Canister
- -A- Vent Connection
- -T- Connection to Fuel Tank
- -M- to EVAP Canister Purge Regulator Valve 1 -N80-
- Cap