Instrument Cluster -KX2-, REMOVING AND INSTALLING: Notes

Special tools and workshop equipment required

Two of Hook:T10538
Torque Screwdriver:VAG1624
Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9 .

NOTE:

Do not disassemble the Instrument Cluster -KX2-.

It is not necessary to remove the steering wheel in order to remove the Instrument Cluster -KX2-.

If the Instrument Cluster - KX2- is replaced with the Instrument Cluster Control Module -J285-, select the "Replace" function for the corresponding control module in "Guided Fault Finding" or "Guided Functions" mode. Refer to Vehicle Diagnostic Tester.