Control Module for Emergency Call Module and Communication Unit -J949-, REPLACING

Control Module for Emergency Call Module and Communication Unit -J949-, Replacing and Adapting

• Current data for the "Guided Fault Finding"

-- Select the Replace control module  function on Vehicle Diagnostic Tester in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Remove the Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Install the new Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Select the Coding  function on Vehicle Diagnostic Tester in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Adapting to Immobilizer  function on Vehicle Diagnostic Tester in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Activating  function on Vehicle Diagnostic Tester in the Guided Fault Finding  or Guided Functions  mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Exit Guided Fault Finding  or Guided Functions  .

-- Switch off the ignition.