ATF Level, Checking: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit: SMN372500
- If filling the ATF, only use ATF that is available as a replacement part. Refer to the Parts Information.
Requirements
- The vehicle is level and all hoist mounts are the same height.
- Noise insulation removed.
- The Vehicle Diagnostic Tester is connected.
- To begin working, the oil temperature should not be higher than 45 °C (113 °F).
- Test temperature: 35 to 45 °C (95 to 113 °F)
WARNING:
Risk of injury due to hot transmission fluid.