Transmission Fluid Pan, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Always replace the transmission fluid pan, the bolts of the transmission fluid pan and the clamp.
• Replace the O-ring -arrow- on the connector for the Dual-Clutch Transmission Mechatronic -J743-.
• If the Dual-Clutch Transmission Mechatronic -J743- is being replaced, the O-ring is included in the replacement part delivery package.

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the sealing surface on the transmission housing of oil and grease.

-- Coat the O-ring on the connector for the Dual-Clutch Transmission Mechatronic -J743- with transmission fluid.

-- Position the new oil pan -2- and tighten the new bolts -1- diagonally in multiple steps.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• When positioning oil pan, ensure electrical wires are not pinched.

-- Install the new clamp -3-.

• The offset side of the clamp points to the transmission.

-- Attach and lock the mechatronic connector on the transmission.

-- If equipped, tie the wires for the Secondary Air Injection Pump Motor -V101-. Refer to SECONDARY AIR INJECTION PUMP MOTOR -V101-, REMOVING AND INSTALLING .

-- Install the air duct pipes and air duct hoses. Refer to OVERVIEW - CHARGE AIR SYSTEM .

-- Fill transmission oil and check oil level. Refer to TRANSMISSION FLUID .