Special Tools

Special tools and workshop equipment required 

• Engine Support Bridge: 10-222A 
• Engine Support Bridge - Engine Support 29: 10-222A/29 
• Engine Support Bridge - Engine Support 18: 10-222A/18 
• If necessary Engine/Gearbox Support Shackle: 10-222A/12 
• Transmission Support - Pins 29: 3282/29 
• Transmission Support: 3282 

Special tools and workshop equipment required 

• Transmission Support - Mounting Plate 33: 3282/33 
• Support Elements for transmission (determine when mounting the Mounting Plate on the Transmission Support)
• Transmission Support Jig: 3336  for transporting the transmission
• Torque Wrench, 6-50Nm: VAG1331A 
• Torque Wrench 1332 40-200Nm: VAG1332 
• Engine and Gearbox Jack: VAS6931 

Special tools and workshop equipment required 

• Press Piece - Rod: VW407 
• Bushing Driver - Selector Shaft: T10168 
• Seal Installer - Driveshaft: T40008 
• -1- Internal Puller: VAS251605  (Kukko 21-2)
• -1- Internal Puller: VAS251609  (Kukko 21-4)
• -4- Counter Support: VAS251621  (Kukko 22-1)
• -4- Counter Support: VAS251623  (Kukko 22/2)

Special tools and workshop equipment required 

• Slide Hammer Set - Adapter 40: VW771/40 
• Engine Support Brackets: T40093/3-6A  (quantity: 2)
• Engine Support Bridge - Special Hook: 10-222A/20 
• Square Pipe: T40091/1  (quantity: 2)
• Engine Support - Joint Fixture: T40091/3  (quantity: 2)
• Spindle: T40093/3  (quantity: 2) from the Engine Support Supplement Set: T40093B 
• Engine Sling - Engine Bracket: 2024A/1  from Engine Sling: 2024A 

Special tools and workshop equipment required 

• Holding Plate: VW309A 
• or Holding Plate: VW309A 
• Holding Fixture: VW313 
• Transmission Support: VW353 
• Press Piece - Multiple Use: VW455  or Press Piece - Front Wishbone: 3160 
• Slide Hammer Set: VW771 
• -1- Internal Puller: VAS251603  (Kukko 21-01)
• -3- Splitter: VAS251407  (Kukko 17-0)
• -4- Counter Support: VAS251621  (Kukko 22-1)

Special tools and workshop equipment required 

• Bracket - Multiple Use: 30-211A 
• Seal Installer - Drive Flange: T10143  or Seal Installer - Output Shaft Oil Seal: T10180 
• Locking Sleeve Drift: T10169 
• or Locking Sleeve Drift: T10362  . Refer to Figure.
• Seal Installer - Driveshaft: T40008 
• Torque Wrench, 6-50Nm: VAG1331A 
• Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A 

Special tools and workshop equipment required 

• Bearing Driver - Multiple Use: VW244B 
• Transmission Support: VW353 
• Press Plate: VW401 
• Press Plate: VW402 
• Press Piece - Rod: VW407 
• Press Piece - 37mm: VW416B 

Special tools and workshop equipment required 

• Guide Pin: VW436A 
• Press Piece - Guide Pin: VW439 
• Slide Hammer Set: VW771 
• Crankshaft Holding Fixture: VW801 
• Guide Pin: 10-15 
• Press Piece - Pivot Mount Bushing: 3124 

Special tools and workshop equipment required 

• Bearing Installer - Crankshaft Pilot Bearing: 3264 
• Subframe Support Tool: 3290 
• Torque Wrench, 6-50Nm: VAG1331A 
• Bushing Driver - Selector Shaft: T10168 
• Locking Sleeve Drift: T10169  or Locking Sleeve Drift: T10362  . Refer to Figure.
• Breather Tube Tool: T10203 

Special tools and workshop equipment required 

• Used Oil Collection and Extraction Unit: SMN372500 
  Fig 10: Identifying Used Oil Collection and Extraction Unit

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Connecting Pin: T10027A 
  Fig 11: Identifying Connecting Pin

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Socket and Extended Bit: T10107A 
  Fig 12: Identifying Socket And Extended Bit

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Gearbox Support: T10108 
  Fig 13: Identifying Gearbox Support

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Wedge Set: T10383 
  Fig 14: Identifying Wedge Set

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller - Crankshaft/Power Steering Seal: T20143/1 
  Fig 15: Crankshaft / Power Steering Seal Puller

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Hose Clip Pliers: VAG1275A 
  Fig 16: Identifying Hose Clip Pliers

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine and Gearbox Bracket: VAS6095A 
  Fig 17: Engine And Transmission Holder

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane: VAS6100 
  Fig 18: Identifying Shop Crane

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Engine Bung Set: VAS6122 
  Fig 19: Engine Bung Set

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Shop Crane - Drip Tray: VAS6208 
  Fig 20: Identifying Drip Tray

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Holding Plate: VW309A 
  Fig 21: Identifying Holding Plate

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Press Piece - Shift Rod/Alternator: VW423 
  Fig 22: Identifying Press Piece - Shift Rod/Alternator

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pry Lever: 80-200 
  Fig 23: Identifying Pry Lever

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Hose Clamps - Up To 25 mm: 3094 
  Fig 24: Hose Clamps

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Transmission Support Jig: 3336 
  Fig 25: Identifying Transmission Support Jig

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Triple Square Socket Driver: 3357  for transmission fluid fill plug with internal multi-point fitting
  Fig 26: Identifying Triple Square Socket Driver

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Backrest Panel Tool: 3370 
  Fig 27: Backrest Panel Tool (3370)

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Not Illustrated:
• -1- Internal Puller: VAS251605  (Kukko 21-2)
• -1- Internal Puller: VAS251609  (Kukko 21-4)
• -4- Counter Support: VAS251623  (Kukko 22/2)
• Thread adapter from Counter Support: VAS251621  (Kukko 22-1)