Transmission Fluid Cooler, Removing And Installing: Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in the reverse order of removal while noting the following:

• Replace the O-rings -arrows- after removal.
• Coat the O-rings with transmission fluid before inserting to prevent the rings from being crushed during assembly.
• If there is damage to the sealing surface of the transmission fluid cooler it must be replaced.

-- Remove the screen -1- of the transmission fluid cooler carefully using a screwdriver and check for contamination.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If necessary clean and clip in the screen again.

-- Carefully position the transmission fluid cooler -A-. At the same time pay attention to the sealing surface and the O-rings.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Position the bolts -arrows- in steps diagonally.

-- Install the battery and the battery tray if they were removed. Refer to BATTERY TRAY, REMOVING AND INSTALLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Check and fill with transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .