Control Module For Emergency Call Module And Communication Unit -J949-, Removing And Installing, Rear Bench Seat: Removing

WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

The Control Module for Emergency Call Module and Communication Unit -J949- will be called control module in the information that follows.

If the control module is replaced, the test plan to replace the control module must be performed.

-- Perform the function "Emergency call control module, replacing" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Bench seat/individual seats, removing and installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Loosen the rear sill panel. Refer to REAR SILL PANEL, REMOVING AND INSTALLING .

-- Fold the carpet forward until the control module is accessible. Refer to CARPET, REMOVING AND INSTALLING .

-- Pivot out the bracket -2- in -direction of the arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hook -2- and remove the control module -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.