Left/Right Rear Parallel Parking Assistance Sensor G716/G717, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Press the hook in the -direction of the arrow- and at the same time press the sensor -1- from the outside to the inside.
-- Disconnect the connector -2- and remove it straight off the parallel sensor -1-.
-- Remove the sensor -1-.