Driver And Front Passenger Door Control Module J386/J387, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the Door Control Module Is Replaced, the Test Plan to Replace the Control Module Must Be Performed:

-- Perform the "Control module, replacing" function with the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connectors -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the hook -3- in the direction of -arrow A-.

-- Push the door control module -1- in the direction of -arrow B- and remove.