Engine Sound Generator Module 1 RX21, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front underbody trim panel. Refer to FRONT UNDERBODY TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Disconnect the connector -4-.
-- Remove the nuts -2-.
-- Remove the Engine Sound Generator Module 1 -RX21- -1- from the bracket -3-.