Right FOOTWELL Vent Temperature Sensor G262, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

LHD vehicle

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

Continuation for all vehicles

RHD vehicles

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

Continuation for all vehicles

-- Disconnect the connector -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Use the commercially available plastic wedge to remove the Right Footwell Vent Temperature Sensor -G262- -2-.