Rain/Light Recognition Sensor, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Place the ignition key outside of the vehicle interior, to avoid an unintentional start of the vehicle.
-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Release the spring retainers -2- using a narrow screwdriver -5- in direction of the -arrow-.
-- Wait one minute so that the silicone pad can be removed without leaving any residue.
-- Loosen the Rain/Light Recognition Sensor -G397- -4- by moving it back and forth.
-- Remove the Rain/Light Recognition Sensor -G397- -4- from the mount -1-.