Measurement Preparations, Axle Alignment Without Driver Assistance Systems

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wheel Alignment Computer:V.A.G 1813F

Fig 1: Identifying Wheel Alignment Computer V. A. G 1813
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Brake Pedal Actuator:V.A.G 1869/2 .

Fig 2: Identifying Brake Pedal Actuator
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Insert Tool - 18mm:T10179

Fig 3: Insert Tool - 18mm
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Shock Absorber Set:T10001

Fig 4: 18 mm socket from the Shock Absorber Set
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

The lateral run-out of the rims must be balanced: otherwise, the measurements will be falsified:

A correct toe-in adjustment will not be possible without performing lateral run-out compensation!

Follow the operating instructions provided by the manufacturer of the alignment equipment.

-- Carry out wheel run-out compensation.

-- Insert the Brake Pedal Actuator:V.A.G 1869/2 .

-- Actuate the brake pedal using brake pedal actuator.

Preparation Work for Calibrating Driver Assistance Systems