Service Interval Display, Coding
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the displays indicated in the procedure are not shown on the display, refer to the Vehicle Diagnostic Tester Operating Instructions.
Coding from flexible to fixed intervals.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING . |
| -- Switch the ignition on. |
| -- Perform the vehicle identification. |
| -- Enter the work order data or select "no work order". |
| -- Select "control module". |
| -- Select "Instrument Cluster". |
| -- Select "Guided Functions". |
| -- Select "Flexible / fixed change intervals". |
| -- Perform the adaptation according to the "Guided Functions". |
Changing the km maximum values for oil change service (fixed) during the pre-delivery inspection
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING . |
| -- Switch the ignition on. |
| -- Perform the vehicle identification. |
| -- Enter the work order data or select "no work order". |
| -- Select "control module". |
| -- Select "Instrument Cluster". |
| -- Select "Guided Functions". |
| -- Select "Oil change service (fixed)" |
| -- Follow the "Guided Functions" instructions. |
| -- Reset "-1- Oil change service (fixed)". |
| -- Follow the "Guided Functions" instructions. |
| The current km maximum values are displayed in the Vehicle Diagnostic Tester. |
| -- Select "no". |
| -- Select the country-specific maximum value until the next oil change service. |
| -- Perform the adaptation according to the "Guided Functions". |