Windshield Wiper Arms, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Refer to Windshield Wiper, Bringing into Service Position .
-- Pry off the caps -3- with a suitable screwdriver.
-- Loosen the nuts -2- several turns.
CAUTION:
Risk of damaging the wiper arm.
- Only use the Puller - Wiper Arm Kit - Puller 2:T10369/2 .
-- Position the puller -A- onto the wiper arms -3-.
-- Position the thrust piece -2-.
-- Turn the bolts -1- clockwise until the windshield wiper arms -3- are removed from the wiper arm shafts.
-- Remove the puller -A-.
-- Remove the nuts -4-.
-- Remove the wiper arms -3-.