LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front Suspension >> 40 Front Suspension >> Lower Control Arm And Ball Joint >> Control Arm Stone Chip Protection, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Control Arm Stone Chip Protection, Removing And Installing: Removing

The following information describes the removing and installing on the left side of the vehicle as an example.

Press the expanding rivets with the pins inward

-- Press the pins -arrow- inward into all expanding rivets -2-.

GWWN43-10209Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry out the expanding rivets with a commercially available plastic wedge and remove the stone chip protection for the front control arm -1-.

-- Remove the pin -arrow- from above on the control arm.

Remove the expanding rivets with the pins

-- Remove the pins -arrow- from all expanding rivets -2-.

GWWN40-000069Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pry out the expanding rivets with a commercially available plastic wedge and remove the stone chip protection for the control arm -1-.

Continuation for all vehicles