Rain/Light Recognition Sensor G397, Removing And Installing: Removing
If the rain/light recognition sensor is replaced by a sensor with a different part number, the new rain/light recognition sensor must be coded.
-- Perform the "Rain/Light Recognition Sensor, Replacing" function using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Remove the interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Release the retainers -arrows-.
Risk of damaging the connecting pad by removing to quickly.
- Keep to a wait time of at least 1 minute so that the connecting pad can release the tension.
-- Pry out the rain/light recognition sensor -2- starting at the top carefully out of the interior rearview mirror baseplate.
-- Remove the rain/light recognition sensor -2-.