Deactivate The App Function

For the installation of the windshield wiper arm on the windshield wiper motor it is required that the windshield wiper motor is in the end position. To ensure this, the APP function must be deactivated to switch off the alternating park position.

Tip

An activation of the alternating park position is not possible.

Tip

With a new windshield wiper motor and a windshield wiper motor in which the alternating park position is deactivated after 100 wash cycles the alternating park position is automatically activated.

-- Perform "APP Function, Deactivating" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .