Overview - Front Motor

1. Three-Phase Current Drive 2 -VX97-
   • With Electric Drive Motor 2 -V717-
   • With Drive Motor Temperature Sensor 2 -G1146-
   • With Drive Motor 2 Rotor Position Sensor 1 -G1147-
   • With Electric Drive Power and Control Electronics 2 -JX4-.
   • Refer to ELECTRIC DRIVE POWER AND CONTROL ELECTRONICS, REMOVING AND INSTALLING, AWD .
   • Refer to Front Motor, Removing  .
   • Refer to Front Motor, Installing  .
2. Transmission Mount Bolt
   • Replace after removing
   • 70 Nm +90°
3. Transmission Support Bolt
   • Quantity: 3
   • Replace after removing
   • 50 Nm +90°
4. Transmission Support
5. Transmission Breather Line
6. Transmission Mount Bolt
   • Quantity: 2
   • Replace after removing
   • 50 Nm +90°
7. Transmission Mount
   • Refer to Transmission Mount, Removing and Installing  .
8. High-Voltage Connector for Electric Drive Power and Control Electronics 2 -JX4-
9. Cable Guide for High-Voltage Cable
10. Cable Guide Bolt
    • Quantity: 3
    • 8 Nm
11. Potential Equalization Cable Bolt
    • 8 Nm
12. Connector for Electric Drive Power and Control Electronics 2 -JX4-
13. Potential Equalization Cable
14. Motor Support
15. Front Motor Mount
    • Refer to FRONT ENGINE/MOTOR MOUNT, REPLACING, AWD .
16. Motor Mount Bolt
    • Replace after removing
    • 130 Nm +180°
17. Motor Support Bolt
    • Quantity: 3
    • Replace after removing
    • 50 Nm +90°
18. Motor Support Bolt
    • Quantity: 3
    • Replace after removing
    • 50 Nm +90°
19. Motor Mount Bolt
    • Replace after removing
    • 130 Nm +180°
20. Front Motor Mount
    • Refer to FRONT ENGINE/MOTOR MOUNT, REPLACING, AWD .
21. Motor Support

Overview - Motor Noise Insulation 

1 -  Clip

2 -  Clip/Bolt

-  Dependent on vehicle equipment/version

-  Bolt with washer

-  Quantity: 2

-  5 Nm

3 -  Clip

-  Quantity: 2

4 -  Three-Phase Current Drive 2 -VX97-

5 -  Noise Insulation

-  Dependent on vehicle equipment/version

6 -  Clip