Calibration Unit:VAS 6350A, INSTALLING AND ALIGNING: Requirements
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
- The camera lens must be clean.
- The vehicle must be standing on a firm and level surface.
- There must be sufficient open space around the vehicle.
- The parking brake must be set.
- The steering wheel must be in the 0 position and the wheels must be straight.
- All doors and the rear lid must be closed.
- No one should be in the vehicle.
- The vehicle must not be loaded (curb weight).
- Before each calibration: turn on the ignition.
Special tools and workshop equipment required
- Calibration Unit:VAS 6350A
- Vehicle Diagnostic Tester
The Calibration Unit:VAS 6350A consists of the following parts:
- Calibration Tool - Wheel Center Mountings:VAS 6350/1
- Calibration Tool - Spacing Laser:VAS 6350/2
- Calibration Tool - Linear Laser:VAS 6350/3A