Vehicle Electrical System Control Module J519, Removing And Installing, LHD: Removing

WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the vehicle electrical system control module is replaced, the test plan for replacing the vehicle electrical system control module must be performed.

-- Perform the "vehicle electrical system control module, replacing" function using the Vehicle Diagnostic Tester. Refer to the appropriate Service Information .

Continuation

-- Remove the footwell cover on the driver side. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the springs -3- in the -direction of arrow A-.

-- Pivot out the vehicle electrical system control module -1- from the bracket -4-.