Tightening Specifications

• Refer to OVERVIEW - SUBFRAME
• Refer to OVERVIEW - STEERING GEAR 
• Wheel Bolts. Refer to the appropriate service information .
• Pendulum support bolts. Refer to the appropriate engine assembly article, Overview - Assembly Mounts .
• Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
• Exhaust system to subframe. Refer to the appropriate Exhaust System article, Overview - Muffler .

If the steering wheel is still crooked after using the : T10486/1  then an axle alignment is necessary. In this case the record it in the vehicles axle alignment log.