Lock Carrier, Removing And Installing: Notes

WARNING: This page is about a different car, the 2020 Volkswagen Atlas, 2019 Volkswagen Atlas, and 2018 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Guide Pins: T10093
Torque Wrench 1331 5-50Nm: VAG1331
Torque Wrench 1332 40-200Nm: VAG1332

NOTE:

The lock carrier is a safety related component. For this reason the lock carrier may only be serviced in the specified positions.

Replace the lock carrier if it is damaged.

For vehicles with the Distance Regulation Control Module -J428-, the Distance Regulation Control Module -J428- must be realigned every time the lock carrier is removed and installed or replaced.

Notes and work procedures for the Distance Regulation Control Module -J428-. Refer to Adaptive Cruise Control (ACC) .