Engine, Securing To Engine And Transmission Holder

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Special Tools - Engine, Removal And Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Secure the engine to the : VAS6095A when working on the engine.

When a repair is to be performed on the chain drive use the : 3269 .

Procedure

-- Remove the transmission. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Engage the : 3033 as follows and lift out of the engine using : VAS6100 from : VAG1383A .

Fig 2: Engaging Engine Sling 3033 & Lifting Engine Using Shop Crane VAS 6100

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vibration damper side: item 3.

Drive plate side: item 11.

When Using the : VAS6095A with the Universal Mounts:

Fig 3: Identifying Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the engine to the : VAS6095A as shown.

When Using the : 3269 :

Fig 4: Identifying Engine Support 3269 Tightly Bolted To Cylinder Block

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the : 3269 as shown on the cylinder block.