Left Vent Temperature Sensor -G150-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2020 Volkswagen Atlas, 2019 Volkswagen Atlas, and 2018 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Replace the O-ring -3- if it is damaged or faulty.

-- Connect the connector -2-.

-- Place the Left Vent Temperature Sensor -G150- -1- in the mount and turn 90°.

NOTE:

An incorrectly installed vent temperature sensor causes flow-generated noise.

-- Check the DTC memory and erase any displayed entries. Refer to Vehicle Diagnostic Tester in the"Guided Fault Finding" function.