Without Test Stand For AWD Vehicles

WARNING: This page is about a different car, the 2020 Volkswagen Atlas, 2019 Volkswagen Atlas, and 2018 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

With AWD, testing with standard one-axle dynamometer

-- Drive the vehicle forward onto the rollers.

-- Turn off the engine and wait two seconds.

-- Perform the brake inspection.

-- Start the engine and wait approximately five seconds until there is enough vacuum.

-- Drive the vehicle forward until the rear wheels are standing on the rollers.

-- Turn off the engine and wait two seconds.

-- Perform the brake inspection for the rear brakes.

-- Start the engine and wait approximately five seconds until there is enough vacuum.