Engine, Securing To Engine And Transmission Holder

WARNING: This page is about a different car, the 2020 Volkswagen Atlas, 2019 Volkswagen Atlas, and 2018 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Hose Clip Pliers:VAS5024A
Engine and Transmission Holder:VAS6095A with Engine Support:3269
Shop Crane:VAS6100
Shop Crane - Drip Tray:VAS6208

Secure the engine to the :VAS6095A when working on the engine.

When a repair is to be performed on the chain drive use the :3269 .

Procedure

-- Remove the transmission. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Engage the :3033 as follows and lift out of the engine using :VAS6100 from :VAG1383A .

Fig 1: Engaging Engine Sling 3033 & Lifting Engine Using Shop Crane VAS 6100

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vibration damper side: item 3.

Drive plate side: item 11.

When Using the :VAS6095A with the Universal Mounts:

Fig 2: Identifying Engine And Transmission Holder VAS 6095

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the engine to the :VAS6095A as shown.

When Using the :3269 :

Fig 3: Identifying Engine Support 3269 Tightly Bolted To Cylinder Block

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the :3269 as shown on the cylinder block.