Measurement Preparations, Axle Alignment Without Driver Assistance Systems
Special tools and workshop equipment required
- Wheel Alignment Computer: VAG1813F or VW/Audi approved wheel alignment devices
- Brake Pedal Actuator: VAG1869/2 .
- Insert Tool - 18mm: T10179
- Shock Absorber Set: T10001
The Lateral Run-Out of the Wheel Must Be Balanced (Compensated For). Otherwise, the Measurement Result Will Be False.
A Correct Toe-In Adjustment Will Not Be Possible without Performing Lateral Run-Out Compensation!
Follow the operating instructions provided by the manufacturer of the alignment equipment.
-- Carry out wheel run-out compensation.
-- Install the : VAG1869/2 .
-- Actuate the brake pedal using brake pedal actuator.
Preparation Work for Calibrating Driver Assistance Systems