Overview - Control Module And Hydraulic Unit, RHD

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Control Module And Hydraulic Unit, RHD

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Brake Line
- Brake master cylinder/secondary piston circuit to hydraulic unit
- Identification: 6 mm diameter and pipe fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- Brake master cylinder/primary piston circuit to hydraulic unit
- Identification: 6 mm diameter and pipe fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- To the right rear brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- To the left front brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M10 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- To the right front brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- To the left rear brake caliper
- Identification: 5.25 mm diameter and tube fitting with a M10 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
ABS Hydraulic Unit -N55- with ABS Control Module -J104-
- Component Location Overview. Refer to COMPONENT LOCATION OVERVIEW .
- Removing and installing. Refer to CONTROL MODULE, INSTALLING ON HYDRAULIC UNIT .
- ABS Control Module -J104-, Disconnecting from ABS Hydraulic Unit -N55-. Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT .
- ABS Control Module -J104-, Installing on ABS Hydraulic Unit -N55-. Refer to CONTROL MODULE, INSTALLING ON HYDRAULIC UNIT .
- Connecting the brake lines. Refer to BRAKE LINES, ATTACHING TO HYDRAULIC UNIT, RHD .
Bracket
- After installing, heck for secure fit
Bolt
- Quantity: 2
- 8 Nm
Rubber Bushing
- Quantity: 3
Nut
- 20 Nm
Bracket
Nut
- Quantity: 2
- 20 Nm
Brake Booster with Master Brake Cylinder
- Overview - Brake Booster/Brake Master Cylinder. Refer to OVERVIEW - BRAKE BOOSTER/BRAKE MASTER CYLINDER .
- Brake Booster, Checking. Refer to VACUUM SYSTEM, CHECKING .
- Brake Booster, Removing and Installing, Vehicles with Gasoline Engine. Refer to BRAKE BOOSTER, REMOVING AND INSTALLING, RHD, GASOLINE ENGINE .
- Brake master cylinder, removing and installing. Refer to BRAKE MASTER CYLINDER, REMOVING AND INSTALLING, RHD VEHICLES .
Brake Line
- Brake master cylinder/primary piston circuit to hydraulic unit
- Identification: 6 mm diameter and pipe fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm
Brake Line
- Brake master cylinder/secondary piston circuit to hydraulic unit
- Identification: 6 mm diameter and pipe fitting with a M12 x 1 thread
- Repairing the brake lines. Refer to BRAKE LINES, REPAIRING .
- With standard tool: 14 Nm
- With special tools VAS6854 (Mini Torque Wrench), VAG 1410/7 (Torque Wrench - Universal Joint) and VAG 1410/6 (Open Ring Spanner Insert - AF 11mm): 12 Nm