Engine, Securing To Engine And Transmission Holder

Fig 1: Identifying Special Tools - Engine, Securing To Assembly Stand

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Procedure

The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Unlock the retaining tab -arrow- and remove the left engine cover mount -1-.

Fig 2: Identifying Engine Cover Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the right engine cover mount -1-.

Fig 3: Identifying Engine Cover Mount And Locating Bore

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the :2024 A onto the engine and onto the :VAS6100 .

Fig 4: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To be aligned to the center of gravity of the engine assembly, the hole rails must be inserted as shown.

-- Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

-- Lower the engine from the :VAS6931 using the :VAS6100 .

-- Remove the transmission alignment sleeves and fasten the transmission side of the engine on the :VAS6095A .

Fig 5: Identifying Engine And Transmission Holder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.