Securing On Engine And Transmission Holder
WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Shop Crane: VAS6100
- Holding Plate: VW309A
- or Holding Plate: VW309A
- Transmission Support: VW353
- Engine and Gearbox Bracket: VAS6095A
Remember that oil can be in the transmission. Do not turn the transmission with the vents facing downward when transporting or when it is on the assembly stand. The fluid will leak out.
NOTE:
If necessary, remove the bleeder cap and seal using suitable leakproof plugs.
Transmission, Securing to Engine/Transmission Holder
Example Image:
-- Mount the transmission to the : VW353 and place it, with the : VW309 in the : VAS6095 .