Adjusting Information

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Prior to adjusting the door window, the setting of the door with respect to the body and the correct seating of the seal in the roof molding must be checked and adjusted if necessary.
The vehicle must be on a level surface on the ground.
Step 3 in the following is only necessary on a new B-pillar trim without having to bond.

NOTE:

If the B-pillar trim has not been replaced, proceed as follows:

Step 1: Adjust the rear door window.

Step 2: Adjust the front door window.

Step 3: Bonding is done now only on a new B-pillar trim.

Door window adjustment sequence: 1. Basic height adjustment, 2. Length adjustment, 3. Checking height and adjusting if necessary, 4. Angle adjustment