Infotainment System Display, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
CAUTION:
Risk of damaging the component surfaces.
- When positioning a prying tool, put commercially available adhesive tape over the component in the visible area.
-- Remove the instrument panel center trim. Refer to RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING .
-- Insert the : T10057 in the release slots -2- of the Front Information Display Control Head -J685- -1-.
- The points at the grip eyelets of the : T10057 must face outward.
-- Release the upper locking mechanisms -2- by pushing in the direction of travel.
-- Release the lower locking mechanisms -2- by pushing in the direction of travel.
-- Remove the Front Information Display Control Head -J685- -1-.
-- Release and disconnect the connectors.