Seat Belt Webbing, Checking

Procedure 

-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.

-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the Owner's Manual.

• If one of the types of damage (1 and 2) shown in the following is detected on a vehicle which has been in an accident, the entire seat belt must be replaced with the belt latch.
• If damage under points 1, 2, 3 and/or 4 is detected on a vehicle not involved in an accident, then only the damaged seat belt needs to be replaced.

1. Seat belt webbing cut, torn or frayed.
   Fig 1: Belt Webbing Cut, Torn Or Chafed

   Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
2. Webbing loops on seat belt edge torn.
   Fig 2: Checking Belt Webbing - Webbing Loops On Belt Edge Torn

   Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
3. Burn marks from cigarettes or similar.
   Fig 3: Burn Marks From Cigarettes Or Similar

   Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
4. One side of belt edge deformed or area of belt edge is wavy.
   Fig 4: Belt Edge Deformed On One Side And/Or Belt Edge Area Is Wavy

   Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.