Overview - Shift Mechanism

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Move the selector lever into "P" and set the parking brake before working with the engine running.

Fig 1: Exploded View Of Selector Mechanism

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Handle with Shift Cover
- Do not remove the handle unnecessarily. Only unclip the cover for the emergency release. Refer to EMERGENCY RELEASE FROM P .
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
Shift Mechanism
- With integrated Selector Lever Sensor System Control Module -J587- with Selector Lever -E313-, Tiptronic Switch -F189-, Selector Lever Park Position Lock Switch -F319- and Shift Lock Solenoid -N110-.
- Removing and installing. Refer to SHIFT MECHANISM, REMOVING AND INSTALLING .
- Checking and Adjusting. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .
Bolt
- 4 Nm
- For the selector mechanism to the selector housing
- Quantity: 4
Plugs
Hex Nut with Collar
- M6 - 8 Nm
- M8 - 20 Nm
- Quantity: 4
Shifter Housing
Bracket
- For the selector lever cable
- Is secured to the ATF cooler
Transmission
Cable Bracket
- For the selector lever cable
- With installed grommet and spacer for the cable bracket mounting on the transmission
Bolt
- 13 Nm
- Selector Lever Cable Adjusting Bolt
Selector Lever Cable
Clamps
- Replace after removing
- Secures the selector lever cable on the cable bracket
Bolt
- 20 Nm
Clamps
- Replace after removing