New Window Glass, Preparing For Installation
WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The application area for the adhesive bead is not pre-coated and not primed.
The application area has a ceramic coating.
Not all windows are pre-coated.
The sealing lip is a component of a new windshield.
-- Clean the window edge 20 mm all the way around with Cleaning Solution.
-- Then dry the window edge with a lint-free cloth.
-- Apply Primer -3- using the Applicator -2- evenly in a single stroke onto the ceramic layer -1-.
- Exception: If the bonding is going to be performed longer than one day after cutting back the adhesive bead, then the remaining material must be activated with the Activator.
-- Apply the activator evenly in a single stroke using the Applicator.
CAUTION:
Risk of damaging the paint with the activator.
- Apply activator precisely on the adhesive bead and do not drip.
- Drying time is approximately 10 minutes