Basic Height Adjustment

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Hex Ball Socket: T10058

NOTE:

Screw -2- can be adjusted by a total of 16 revolutions, screw -5- by 11 revolutions. The center position is the base setting.

One turn = 1 mm adjustment.

Right turn = door window up, left turn = door window down.

New window regulators are delivered with the correct basic setting.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the door window -1- all the way downward toward the basic setting.

-- Remove the caps -7- on the underside of the door.

The : T10058 -4- can be used to turn the adjusting screw.

NOTE:

The tool -4- is inserted on the front window regulator rail at an angle of 23° -a- to approximately 102 mm -c-.

The tool -4- is inserted on the rear window regulator rail at an angle of 10° -b- to approximately 103 mm -d-.

-- Turn the front and rear adjusting screws -2- all the way down.

-- Rotate the front adjusting screw -2- exactly eight turns upward.

-- Rotate the rear adjusting screw -2- exactly five and a half turns upward.

The center position is now reached. The basic adjustment is completed.