Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2020 Volkswagen Arteon and 2019 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Engine compartment battery: remove the battery tray -1-. Refer to BATTERY TRAY, REMOVING AND INSTALLING .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Luggage compartment battery: remove the air filter housing mount.

Golf, Passat, Touran, Tiguan and Arteon:

Fig 1: Identifying Engine Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine/Motor Control Module -J623- from the bracket. Refer to Engine/Motor Control Module -J623-, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the bracket -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

Depending on the version different brackets are installed.

All Vehicles:

Fig 2: Identifying Wiring Guide

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If equipped, unclip the wiring guide -1- upward in direction of -arrows- and move it slightly to the side.

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Remove the bolts -2-, then the bolts -arrows- and remove the transmission mount -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.